Skip to main content

Adding a Coordinate System in Geoserver

阿琛6/10/22Less than 1 minuteGIS Relatedgeoserver
  • Determine the wkt parameters of the coordinate on epsg.io
  • Open the data_dir/user_projections folder and find the epsg.properties file
# To add a new 3857 coordinate system, do it like this:

3857=PROJCS["WGS 84 / Pseudo-Mercator",GEOGCS["WGS 84",DATUM["WGS_1984",SPHEROID["WGS 84",6378137,298.257223563,AUTHORITY["EPSG","7030"]],AUTHORITY["EPSG","6326"]],PRIMEM["Greenwich",0,AUTHORITY["EPSG","8901"]],UNIT["degree",0.0174532925199433,AUTHORITY["EPSG","9122"]],AUTHORITY["EPSG","4326"]],PROJECTION["Mercator_1SP"],PARAMETER["central_meridian",0],PARAMETER["scale_factor",1],PARAMETER["false_easting",0],PARAMETER["false_northing",0],UNIT["metre",1,AUTHORITY["EPSG","9001"]],AXIS["X",EAST],AXIS["Y",NORTH],EXTENSION["PROJ4","+proj=merc +a=6378137 +b=6378137 +lat_ts=0.0 +lon_0=0.0 +x_0=0.0 +y_0=0 +k=1.0 +units=m +nadgrids=@null +wktext  +no_defs"],AUTHORITY["EPSG","3857"]]

Reference

  1. https://blog.csdn.net/jin80506/article/details/101210892

AI Translation | AI 翻译

This article was translated from Chinese to English by AI. If there are any inaccuracies, please refer to the original Chinese version.


本文由 AI 辅助从中文翻译为英文。如遇不准确之处，请以中文原版为准。